Your question: How do you make a part based on another part in SolidWorks?

How do I create a new part in an existing part in SolidWorks?

To create a part within an assembly:

  1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
  2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
  3. Select a plane or planar face (while the pointer is ).

How do you reference another part in SolidWorks?

To list the external references on a part or feature, right-click the part or the feature or right-click the update holder , and click External References.

How do you make a derived part?

Create a Derived Part

  1. Create a part file: …
  2. On the ribbon, click Manage tab Insert panel Derive .
  3. In the Open dialog box, browse to the part file (IPT) to use as the base part or component (not available in Inventor LT), and click Open.
  4. Select the Derive style.

How do you separate parts of a STEP file?

On the Manage tab select Make Components. Select the solid bodies to create separate parts files. Thanks a lot!!

IT IS INTERESTING:  What is the difference between AutoCAD 3D and Civil 3D?

How does SOLIDWORKS store parts?

SOLIDWORKS saves your virtual components in a temporary folder somewhere on your pc. When you save the assembly, the virtual models are stored inside the assembly. SOLIDWORKS then also deletes the files in the temporary folder. When you close the assembly, you close all virtual components as well.

How do you move things in Solidworks?

To move, copy, rotate, or mate a solid or surface body: Click Move/Copy Bodies (Features toolbar) or Insert > Features > Move/Copy . Specify parameters to move, copy, or rotate bodies. Apply mates between bodies.

How do you link parts in Solidworks?

When you click on a part or component of an assembly, the part number appears in the Property Tab. To create this note in a drawing sheet, in the Notes PropertyManager, under Text Format, click Link to Property . Then in the Link to Property dialog box, for Property name, select SW-BOM Part Number(BOM Part Number).

How do I make an assembly in Solidworks?

To create an assembly from a part:

  1. Click Make Assembly from Part/Assembly (Standard toolbar) or File > Make Assembly from Part. An assembly opens with the Insert Component PropertyManager active.
  2. Click in the graphics area to add the part to the assembly. SOLIDWORKS makes the first component fixed.

How do you mate a derived part in SOLIDWORKS?

After you insert a part, you can move, copy, rotate, or mate it using Move/Copy Bodies (Features toolbar).

  1. Right-click the part and click External References.
  2. Select a configuration in Configuration, and click OK. You can control the configuration with a design table. See Base Parts in Configurations.
IT IS INTERESTING:  Does AutoCAD require Internet?

How do you use the base part function in SOLIDWORKS?

Use Insert Part to insert a base part into another part document. You can create a new part from solid bodies or surface bodies by using the Insert Into New Part command. You can use Mirror Part to create a part that is an opposite-hand version of an existing part.

What is a derived part solidworks?

You can create a part directly from an existing part. The new part, called a derived part, has the original part as its first feature. By default, the derived part is linked to the original part by means of an external reference. Any changes to the original part are reflected in the derived part.

How do you replace a derived part in Solidworks?

To edit the original part from which another part is derived:

  1. Right-click the derived part, and select Edit In Context. If the part was derived using an insert part or a mirror part, the original part document is opened. …
  2. Change the original part as needed.

What is a derived sketch in Solidworks?

Derives a sketch from another sketch that belongs to the same part, or derives a sketch from another sketch in the same assembly. When you derive a sketch from an existing sketch, you are assured that the two sketches will retain the characteristics that they share in common.