You asked: How do you scale down a sketch in Onshape?

How do you scale a sketch?

To scale a sketch:

  1. In an active sketch, click Modify Sketch. (Sketch toolbar) or Tools > Sketch Tools > Modify.
  2. In the dialog box, under Scale About, select one of the following: Option. Description. Sketch origin. …
  3. Type a value for Factor, and press Enter. You cannot scale a sketch that has external references.
  4. Click Close.

How do you scale something down?

To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.

How do I change the scale on my Onshape sheet?

Edit settings of the sheet:

  1. Right-click the sheet name in the Sheet flyout and select Properties. The Sheet properties modal window opens:
  2. Make changes as desired: Indicate the scale for the sheet. This is reflected in the title block and in the View properties. Specify the paper size. …
  3. Click OK or Cancel.

What is sheet scale?

A sheet scale is a standard scale value for drawing views placed on the working sheet. Typically, the sheet scale is indicated in the drawing border title block. When you place a drawing view on the same sheet using a different scale, you can note the exception scale value in a drawing view caption.

IT IS INTERESTING:  Your question: Can you copyright a building design?

How do you scale a part?

Scaling a Part

  1. In a part document, click Scale (Features toolbar) or Insert > Features > Scale .
  2. Set options in the PropertyManager.
  3. Click. The geometry of the model increases or decreases in size according to the scaling factors and other options you set. The Scale feature scales only the geometry of the model.

How do you scale down a house plan?

The easiest way you can make a scaled room plan is to use graph paper. To use this method you are basically counting squares as feet. For example, if your wall was 12′ 6″ (twelve feet, six inches) your line would be 12 1/2 squares long. Your windows would convert from 3′ (feet) to 3 squares.

How do I check spacing in sketch?

Press ALT and hover over layers/shapes. Suddenly you should see distances between the selected layer and other objects.