How do you show reference planes in Revit?

With the reference planes selected, there is a Subcategory panel on the Modify|Reference Planes contextual ribbon. Expand the Subcategory: drop-down and select Major Reference. When you deselect the reference planes, you can see that they are now green.

Where is the reference plane in Revit?

On the ribbon, click (Reference Plane). To draw a line: On the Draw panel, click (Line). In the drawing area, draw the reference planes by dragging the cursor.

How do you show reference planes?

Reference planes display in each plan view that you create for a model. Use the Line tool or the Pick Line tool to draw a reference plane. Name each reference plane so you can assign it to be the current work plane. Hide a selected reference plane or all reference planes in a view.

How do you show work planes in Revit?

Select a work plane-based element in a view. Click Modify | tab Work Plane panel (Edit Work Plane).

In the Work Plane dialog, select another work plane.

  1. Name—Choose an available work plane from the list, and click OK. …
  2. Pick a plane—Revit creates a plane coincident to the selected plane.
IT IS INTERESTING:  Frequent question: Where are Revit system families located?

What is reference planes in Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.

What is reference line?

Reference Lines allow you to place lines on the plot at specific locations to mark important values. You could use these to mark control limits or to indicate a trend line for a set of data.

How do I create a reference level in Revit family?

Add Levels

  1. Open the section or elevation view to add levels to.
  2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
  3. Place the cursor in the drawing area and click. …
  4. Draw level lines by moving the cursor horizontally. …
  5. Click when the level line is the correct length.

How do you hide reference planes?

Hide the Reference Plane in the View

  1. Select one or more reference planes to hide.
  2. Right-click and click Hide in View Elements. To hide the selected annotations and all other annotations of the same category in the current view, click Hide in View Category.

Do reference planes print in Revit?

Reference planes, crop boundaries, and scope boxes are hidden for printing by default. … Click Print (Print Setup). In the Print Setup dialog, select Hide ref/work planes.

How do you change a reference plane in Revit?

Select a work plane-based element in a view. Click Modify | tab Work Plane panel (Edit Work Plane).

In the Work Plane dialog, select another work plane.

  1. Name—Choose an available work plane from the list, and click OK. …
  2. Pick a plane—Revit creates a plane coincident to the selected plane.
IT IS INTERESTING:  How do I fix AutoCAD problem loading Acbrandres DLL resource file?

How do you create a work plane in Revit family?

In the Family Editor, click Create tab Properties panel (Family Category and Parameters). In the Family Category and Parameters dialog, under Family Parameters, select Work Plane-Based. Click OK. Note: You can make a family both work plane-based and always vertical.

How do I delete a work plane in Revit?

Use the Delete item to delete the active Workplane. To delete the active Workplane click Workplane tab > Active panel > Delete.

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.

What is the use of reference plane?

In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.