How do you revolve a sketch in SolidWorks?

To turn it back on, type RIBBON on the command line. Check to see if the view mode of the ribbon also needs to be adjusted. Click the cycle button to the right of the ribbon tab to cycle through the panel views.

How do you revolve in SolidWorks?

To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

How do you use revolve Extrude in SolidWorks?

Creating Extruded or Revolved Cuts as Assembly Features

  1. Open a sketch on a face or plane, and sketch a profile of the cut. …
  2. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
  3. Set the options as needed in the Extrude or Revolve PropertyManager.

What is needed to revolve a feature?

A revolved feature is an axisymmetric shape that is created by revolving an open or closed section view by a specified angle around a central axis. The section can represent a protrusion or a cut, that is, it can either add material or take it away.

IT IS INTERESTING:  You asked: How do I align multiple lines in AutoCAD?

What is revolved boss in SolidWorks?

To create a revolve feature: Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve.

How do you make a lofted boss in SolidWorks?

How to use Lofted Boss/Base

  1. Click New. …
  2. Click Top Plane and click on Sketch.
  3. Click Circle, sketch a circle start at origin. …
  4. Exit sketch.
  5. Click Top Plane and click Features>Reference Geometry>Plane. …
  6. Click on Plane 1, click Sketch.
  7. Click Circle, sketch a circle start at origin. …
  8. Click on Plane 2, click Sketch.

What is swept boss base in SolidWorks?

Swept Boss/Base PropertyManager

  • Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path.
  • Click Swept Boss/Base (Features toolbar).

How do you do a revolve?

Using the Revolve Tool

  1. Select a sketch.
  2. Click Revolve from the mini toolbar or the Shapes group.
  3. Select an axis for the revolve.
  4. Select Solid from the dashboard.
  5. Specify to revolve from a sketch plane by a specified angle value.
  6. Edit the angle to 180.
  7. Click Flip Direction.
  8. Click Thicken Sketch.

What are the two components necessary for creating a revolve feature?

There are two ways to created revolved features: from a sketch profile or from a primitive. The primitive shape creation commands create full revolutions only.

Specify an Operation:

  • Join . Adds the volume created by the revolved feature to another feature or body. …
  • Cut . …
  • Intersect . …
  • New Solid .
IT IS INTERESTING:  Frequent question: Where are Revit system families located?

What is revolve command in Creo?

Revolve is a method of defining three-dimensional geometry by revolving a sketched section around a centerline. Use the Revolve tool to create a solid or surface feature, and to add or remove material.

What is revolved boss base?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.