How do you Extrude the boss in assembly in Solidworks?

Can you boss extrude in assembly SolidWorks?

To create an assembly feature cut: Open a sketch on a face or plane, and sketch a profile of the cut. The profile can contain more than one closed contour. Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.

How do you extrude a boss in SolidWorks?

Extrude PropertyManager

  1. Create a sketch.
  2. Click one of the extrude tools: Extruded Boss/Base. on the Features toolbar, or click Insert > Boss/Base > Extrude. Extruded Cut. on the Features toolbar, or click Insert > Cut > Extrude. Extruded Surface. on the Surfaces toolbar, or click Insert > Surface > Extrude.

How do you extrude boss bases?

To create an extruded boss: 1) Sketch a profile for the extruded boss. 2) Select Extruded Boss/Base on the Features toolbar or select Insert, Base, Extrude on the menu bar. Use the spin buttons beside the depth text box to change the value, or type in the value in the text box.

IT IS INTERESTING:  How do I add a reference image in Solidworks?

How do you sketch a part in assembly in SolidWorks?

Click New Part (Assembly toolbar) or Insert > Component > New Part. For externally saved parts, type a name for the new part in the Save As dialog box and click Save. Select a plane or planar face (while the pointer is ). Editing focus changes to the new part and a sketch opens in the new part.

How do you edit a extrude boss in Solidworks?

If you enter the wrong distance to extrude to: and exit the boss-extrude dialog without correcting it, go to the design tree, right-click on the extrude name, and find the “edit feature” button in the box of options that appears above the mouse. The dialog will reopen and you can edit the properties of the extrude.

Can we extrude the sketch in both direction in Ansys?

Yes, using extruded direction selection in the box under the end condition drop down.

What is a boss on a 3D part?

A Boss feature is placed at a point centered on the mating face of the head and the thread. The Boss is then extended to the next face of the target part body. To design the two mating components in the two opposite bodies, use the same placement elements with opposite directions.

What is revolved boss base?

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. The revolve feature can be a solid, a thin feature, or a surface.

Can open sketch be extruded in Solidworks?

Set the PropertyManager options. To extrude in both directions from the sketch plane in the PropertyManager, under Direction 1, select Through All – Both Directions. To extrude as a thin feature, set the PropertyManager options in Thin Feature.

IT IS INTERESTING:  What are the steps in designing process of architecture?

Is it possible to create a new part in assembly mode?

You can create a new part in the context of an assembly. That way you can use the geometry of other assembly components while designing the part. You can also create a new subassembly in the context of another assembly.

How do you sketch a part?

Sketch Basics

  1. In a Part Studio, click Sketch and notice the Sketch dialog opens:
  2. Select the plane to sketch on (you are only able to sketch on one plane at a time). …
  3. Select a Sketch tool from the Sketch toolbar.
  4. Click in the graphics area to create the sketch curve.

What are drawing entities?

Drawing entities can be very simple such as lines, circles, arcs, points and rays or complex such as polylines, splines and planes. Apart from 2D entities you can also create 3D surface entities or 3D solids in BricsCAD.