How do I get out of Bricscad viewport?

How do I change the viewport in BricsCAD?

To clip a viewport

  1. Type vpclip in the command bar, then press Enter. You are prompted: Select viewport to clip:
  2. Select the viewport. You are prompted: Polygonal
  3. Do one of the following: Select the clipping object.

How do I get out of viewport layout?

If your stuck in the viewport then you should be able to do as above and type PS then hit enter to get out of it. just for the record Control+R will jump from viewport to viewport.

How do I get out of an unlocked viewport?

Well sometimes I forget to lock the viewport before I zoom in. So then I cant zoom back out and deactivate the viewport. On your right bottom you will find a lock icon(unlocked). Just click it (it locks)…. you are done.

How do you unlock a viewport?

Follow these steps to set up the viewport:

  1. Verify that you’re in paper space. (Check the UCS icon or move the crosshairs.)
  2. Select the boundary of the viewport whose arrangement you want to protect. …
  3. Click the Lock/Unlock Viewport button to lock the viewport scale.
IT IS INTERESTING:  How do I enable Revit Architecture 2009?

Can you make a viewport in model space?

In model space, you can split the drawing area into one or more rectangular areas called model space viewports. Viewports are areas that display different views of your model. … You can start a command in one viewport and finish it in a different viewport. You can make any viewport the current one by clicking in it.

How do I get out of zoomed viewport?

To get this problem out of the way, you should lock your viewports as well:

  1. In paper space, select the viewport(s). Click the pad-lock icon on the status bar; or. …
  2. In the model space of the viewport (i.e. if you’ve double clicked into it), you can also use the pad-lock icon in the status bar to lock/unlock the viewport.

How do I restore a viewport in AutoCAD?

To Restore a Saved Viewport Arrangement in Model Space

  1. Click View tab Model Viewports panel Named. Find.
  2. In the Viewports dialog box, Named Viewports tab, choose a configuration to restore.

What should you do if you are trapped in a viewport?

What should you do if you are trapped in a viewport? are at: simply click on it to go to the other ‘space’. While you are down there, explore the other ones too: right-click over them as well for more options). MSPACE to go back in).

How do you move a viewport?

To Move a Scale Area or a Viewport (AutoCAD Mechanical)

  1. Double-click the viewport or scale area border (1).
  2. In model space the Scale Area dialog box appears, in layout the View dialog box appears: Under border, click Move<. choose ok.>
  3. Select the target position for the viewport (2).
  4. Choose OK.
IT IS INTERESTING:  What is the use of layer in AutoCAD for Civil engineer?

When working in a layout of a viewport is activated and locked?

To Lock the Scale of a Layout Viewport

  • Select the border of a layout viewport.
  • Right-click and choose Display Locked Yes.

How do you center a viewport?

How do you center a viewport?

  1. Type alignspace in the command bar, then press Enter. …
  2. Click inside a layout viewport, then pick a point. …
  3. Right click or press Enter. …
  4. Pick a point in the layout. …
  5. Click inside the viewport you want to align.
  6. Right click or press Enter to confirm.

How do you set a custom viewport scale?

Using the Properties palette . . .

  1. Select the layout viewport that you want to modify.
  2. Right-click, and then choose Properties.
  3. If necessary, click Display Locked and choose No.
  4. In the Properties palette, select Standard Scale, and then select a new scale from the list. The scale you choose is applied to the viewport.

Which keys can you press to repeat your last used Autocad command?

How are AutoCAD keyboard shortcuts used?

5. Modeling
C Draw a circle
CP Copy
CTRL + J Repeat the last used command
X Explode an object, a volume, a polyline, etc.