How do I duplicate an assembly in Catia?

How do you copy parts in Catia?

To copy, you can either:

  1. click the Copy icon.
  2. select the Edit > Copy command.
  3. select the Copy command on the contextual menu or.
  4. from the geometry area or the specification tree, press and hold down the Ctrl key and drag the selection.

How do you duplicate a component?

How to duplicate a component?

  1. Click on the component to display the Edit bar.
  2. Click on the Copy icon (Two pieces of paper) (Fig. …
  3. Navigate to the desire location you want to paste the component.
  4. Either click on an already exists component, or click on a component placeholder to display the Edit bar.

Can you mirror an assembly in Catia?

For a part or assembly that is to be mirrored, create an assembly and insert the part or subassembly into it. In the assembly select the Create Component in Assembly icon or Insert>Component>Create. In the dialog box under the partor subassembly selection choose mirror. Save the parts.

How do I cut an assembly in Catia?

Creating an Assembly Cut

  1. Click Assembly Cut . …
  2. Select Create new 3DShape in the 3DShapes list and click OK. …
  3. Click OK in the 3D Shape / Representation DS dialog box.
  4. Select the geometry in the assembly where you want to create the split features. …
  5. Click OK in the Warning dialog box.
IT IS INTERESTING:  How do I speed up models in Revit?

How do I isolate a part in Catia?

Right-click the plane as the element you want to isolate. This capability works on all GSD features. Select the xxx object > Isolate command from the contextual menu. The geometrical link between the plane and the face is no longer maintained.

How do I copy a component in Solidworks assembly?

Two methods of copying SOLIDWORKS features:

  1. The first is to hold down the CTRL key, then drag & drop the feature to where you want to copy it to.
  2. The second method is to use CTRL+C, then pick where you want it to paste to and use CTRL+V.

How do you mirror holes in Catia?

A cutout and a relimited flange are displayed on the wall.

  1. Click Mirror . …
  2. Select the feature to mirror, that is, Cut Out. …
  3. Select the zx plane in the 3D window as shown below. …
  4. Click on Preview to visualize the mirrored cutout. …
  5. Click Ok to create the mirrored cutout. …
  6. Select Flange.

How do I get section view in Catia Drafting?

Creating a Section View

  1. Click the Drawing window, and click the Offset Section View icon. from the Views toolbar (Sections subtoolbar).
  2. Select the holes and points required for sketching the callout on the view. …
  3. Double-click to end the cutting profile creation.

How do you cross section view in Catia?

To gain access to the Sectioning tool, CATIA users will need to add the Sectioning tool into their 3DCS workbench. With a model open, start the Sectioning tool. The Sectioning Definition will appear. In the Positioning tab, the user can specify the section plane direction in either X, Y, Z directions.

IT IS INTERESTING:  What are ANSI standards used for?

How do you cut a cross section in Catia?

Creating an Offset Section View / Cut

  1. In the Drawing window, click Offset Section View in the Views toolbar ( Sections sub-toolbar). If desired, you can also click Offset Section Cut . …
  2. Create the first point of the profile. …
  3. Choose the constraint. …
  4. Double-click to end the cutting profile creation.