Question: How do I cut a hole in an object in AutoCAD?

To create a hole, you need to select spaces that intersect one another. Alternatively, you can select a closed polyline as the shape to subtract. You can choose whether to keep the subtracted space or polyline in the drawing as a separate unit.

How do I cut a hole in AutoCAD?

How do you cut a hole in a solid in Autocad?

  1. Create a space in which to create a hole.
  2. Create a second, smaller space to be subtracted from the larger space. …
  3. Select the larger space, right-click, and click AEC Modify Tools Subtract .
  4. Select the smaller space to subtract from the larger space.

How do I insert a hole in AutoCAD?

To Create Holes in Layout Grids

  1. Draw a closed polyline to define the hole.
  2. Select a layout grid, and click Layout Grid 2D tab Clipping panel Add Hole.
  3. Select the layout grid, and press Enter.
  4. Select the closed polyline for the hole, and press Enter.

How do I fill a 3D hole in AutoCAD?

I found out that if you hold down CTRL it will allow you to select specific sides/faces of a 3D Solid. So I filled the hole by just holding down ctrl and selecting the inside face of the hole and pressing delete! It then filled the hole!

What is sweep command in AutoCAD?

Creates a 3D solid or 3D surface by sweeping a 2D object or subobject along an open or closed path. Find. Open-ended objects create 3D surfaces, while objects that enclose an area can be set to create either 3D solids or 3D surfaces.

IT IS INTERESTING:  How do I copy a body in FreeCAD?

How do you cut extrude in AutoCAD?

How do you extrude cuts in Spaceclaim?

  1. Click Pull. …
  2. Select the edge or edges you want to extrude. …
  3. Select the Extrude. …
  4. If the arrow pointing the direction you want to pull is not highlighted, click the arrow or press Tab to change the direction.
  5. Click and drag the edge in the direction of the Pull.

What are 3 important properties for any drawing object?

Object properties control the appearance and behavior of objects, and are used to organize a drawing. Every object has general properties including its layer, color, linetype, linetype scale, lineweight, transparency, and plot style. In addition, objects have properties that are specific to their type.

How do you trim objects?

To Trim an Object

  1. Click Home tab Modify panel Trim. Find.
  2. Select the objects to serve as cutting edges. Press Enter when you finish selecting the cutting edges. …
  3. Select the objects to trim and press Enter a second time when you finish selecting the objects to trim.