# How do you create a chainage in AutoCAD?

Contents

Click Home tab Draw panel Line drop-down Create Line Chainage/Offset . Select the alignment. Specify a chainage by either entering a chainage value or clicking in the drawing. Specify a distance by either entering an offset or clicking in the drawing.

## How does AutoCAD calculate chainage?

Adding Chainage Offset Labels – Relative Point

1. Click Annotate tab Labels & Tables panel Add Labels menu Alignment Chainage/Offset .
2. Select the chainage and offset distance to label.

## How do you write chainage?

In surveying,chainage is the measurement of horizontal or curvi-linear path between two points on the surface of earth. It is written as 0+ 000 m where the first 0 is in kilometer and later one is in meter itself. It clearly denote the distance between two points.

## How do you create a chainage in Civil 3D?

Alignment Chainage Control

1. Click Alignment tab Modify panel Alignment Properties drop-down Alignment Properties . …
2. In the Alignment Properties dialog box, click the Chainage Control tab.
3. Under Reference Point, click . …
4. In the drawing, pick a point where you want to establish the XY coordinates for the Reference Point.

## What is meant by chainage?

The term ‘chainage’ is used in surveying to refer to a distance measured in meters along an imaginary line, such as the centre line of a road or railway.

IT IS INTERESTING:  Do room separation lines print in Revit?

## How do I check my chainage?

Use: Utilities => Measure => String from point Once the panel is open: Select the String to measure – the Chainage will be measured along this string.

## What is the difference between chainage and distance?

The chain is a unit of length equal to 66 feet (22 yards). … There are 10 chains in a furlong, and 80 chains in one statute mile. In metric terms, it is 20.1168 m long. By extension, chainage (running distance) is the distance along a curved or straight survey line from a fixed commencing point, as given by an odometer.

## How do you read a survey chainage?

Chainage: As mentioned, chainage refers to the centerline of the structure. Plans are often shown looking at the structure in the direction of increasing chainage. For example, if a road is 30 chains long, the view would look toward the 30 mark from the 0 mark.

## What is Stationage chainage?

Chainage is the historical term for Stationing. The two are the same but stations were used at hundred foot increments where a monument (nail, post, etc) would have been placed and used for surveying.

## How do you draw an alignment?

Exercise 1: Drawing an Alignment that Refers to Design Criteria

1. Open Align-7A. …
2. Click Home tab Create Design panel Alignment drop-down Alignment Creation Tools Find.
3. In the Create Alignment – Layout dialog box, accept the default values for Name and Starting Station. …
4. On the General tab, specify the following parameters: