To gain access to the Sectioning tool, CATIA users will need to add the Sectioning tool into their 3DCS workbench. With a model open, start the Sectioning tool. The Sectioning Definition will appear. In the Positioning tab, the user can specify the section plane direction in either X, Y, Z directions.
How do you cut parts in Catia?
Cutting the Part by the Sketch Plane
- Double-click Sketch. 2 from the geometry. …
- Move the sketch so that you can see the whole part.
- Click Cut Part by Sketch Plane from the Visualization toolbar.
How do you move a section view in Catia?
Go to Tools > Options > Mechanical Design > Drafting > General tab and in the View axis area, clear the Display in the current view check box. Right-click the view that you want to re-position, the unfolded view for example. A contextual menu is displayed. Select View Positioning > Align Views Using Elements .
What is split in Catia?
Split: Split in CATIA is used to cut off one element with another element. … Trim: By the Trim option in Catia, a user can cut off two elements interchangeably. When we are going to trim, it is important to select the elements that we are going to cut off(They will appear in the trimmed elements field).
What are the 7 types of section views?
Types of Sectional Views
- Full Section. If the imaginary cutting plane passes through the entire object, splitting the drawn object in two with the interior of the object revealed, this is called a “full section.” A full section is the most widely-used sectional view.
- Half View. …
- Offset View. …
- Revolving View. …
- Broken View.
What is a section view?
What is a section view? A sectional view or a section looks inside an object. Sections are used to clarify the interior construction of a part that cannot be clearly described by hidden lines in exterior views. … The unwanted portion is mentally discarded exposing the interior construction.
How do I show section in Catia?
About the Cut in section views capability
In the Assembly Design workbench, select one part, then the Edit > Properties command from the menu bar from and either activate or de-activate the Cut in section views option.
How do I see the cross section in Catia?
To gain access to the Sectioning tool, CATIA users will need to add the Sectioning tool into their 3DCS workbench. With a model open, start the Sectioning tool. The Sectioning Definition will appear. In the Positioning tab, the user can specify the section plane direction in either X, Y, Z directions.
How do I leave Catia?
Creating Remove Face Features
- Click Remove Face . …
- Select the inner face as the face to be removed. …
- Click the Faces to keep field and select both faces as shown. …
- Check the Show all faces to remove option to preview all the faces adjacent to the purple face that will be removed.
- Click OK to confirm.
What is the difference between trim and split?
Trim: same as cutting but you can get the part you removed back by “dragging” the side of the clip. Split: you separate the clip in two parts. Both stay intact, they are just divided where you split them.