Frequent question: How do you bend a face in Solidworks?

Contents show

How do you bend in Solidworks?

Sketch a line on a planar face of the sheet metal part. Alternatively, you can select the sketched bend feature before you create a sketch (but after you select a plane). When you select the sketched bend feature, a sketch opens on the plane. on the Sheet Metal toolbar, or click Insert > Sheet Metal > Sketched Bend.

How do you bend a part in Solidworks 2019?

To bend the sheet metal part, sketch lines on the part as shown. , or Insert > Sheet Metal > Sketched Bend . The part bends at the sketched lines.

How do you use the Flex feature in Solidworks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .
…
You can create four types of flexes:

  1. Bending.
  2. Twisting.
  3. Tapering.
  4. Stretching.

How do I change the default bend radius in Solidworks?

To edit the default bend radius, bend allowance or bend deduction, or default relief type: In the FeatureManager design tree, right-click Sheet-Metal and click Edit Feature . Under Sheet Metal Gauges, select Use gauge table, and select a table .

IT IS INTERESTING:  Frequent question: How do I use remote mass in Solidworks?

Where is sheet metal option in Solidworks?

To open this dialog box: With a part, assembly, or drawing open, click Tools > Options > Document Properties > Sheet Metal.

How do you use the forming tool in Solidworks?

To create forming tools:

  1. Create a part to use as a forming tool. …
  2. Click Forming Tool (Sheet Metal toolbar) or Insert > Sheet Metal > Forming Tool.
  3. In the PropertyManager, on the Type tab: …
  4. Select the Insertion Point tab.
  5. Use dimensions and relations tools to define the insertion point. …
  6. Click .

Where is the Flex feature in Solidworks?

To create Flex features, click Flex (Features toolbar) or Insert > Features > Flex, set the PropertyManager options, and click .

How do I add a part to a bend in Solidworks?

Using Insert Bends to Add a Body

  1. In a sheet metal part, select or create a plane and draw a profile sketch.
  2. Click Extruded Boss/Base (Features toolbar).
  3. In the PropertyManager: Set the direction and depth of the extrusion. …
  4. Click Insert Bends. (Sheet Metal toolbar) or Insert > Sheet Metal > Bends .
  5. In the PropertyManager:

How do you bend a round bar in Solidworks?

Create Bar Stock That You Can Bend and Unbend in SOLIDWORKS

  1. Create a section of round bar stock. …
  2. Locate and activate the Flex command. …
  3. Now the Flex Manager is open on the left side of the screen, for the first setting, select the outside of the round stock.