To treat a body as a remote mass: In the Simulation study tree, right-click a solid body in an assembly component or multi-body part, and select Treat as Remote Mass. , select the faces, edges, and vertices that connect the body to the rest of the model. These entities can only deform as a rigid body.
What is a remote load in Solidworks?
Remote loads (forces and/or moments) are applied at a point defined by the X-, Y-, and Z-locations in reference to a selected coordinate system. … A force applied at the remote location transfers as a force and equivalent moment(s) applied to selected face(s).
Is there a difference between the fixed and immovable boundary conditions in Solidworks simulation?
Fixed: No rotations at the fixed edges (slope of the deflected shape is zero). Search ‘Immovable’ in the SOLIDWORKS Knowledge Base.
Which results are available for bolt connector?
A Bolt can connect two components, multiple components, or a component and the ground. You can define bolts through a mixed stack of solids, shells and sheet metal bodies. You can also define a bolt by selecting entities of the same component.
What criteria are best suited to check the failure of ductile materials in Solidworks simulation?
The Maximum shear stress criterion is used for ductile materials.
What is the difference between immovable and fixed?
As adjectives the difference between fixed and immovable
is that fixed is not changing, not able to be changed, staying the same while immovable is incapable of being physically moved; fixed.
Is it possible to mesh a model with a combination of solids shells and beam elements?
Note: SOLIDWORKS Simulation allows mixing and matching solid, shell and beam mesh (another mesh type for long slender structural members) within a single study, so it doesn’t have to be all one or the other.
How do you force in Solidworks?
To apply a force:
- Click Add a force. The Force PropertyManager appears.
- In the graphics area, select the desired faces.
- Select: Normal to apply the force in the direction normal to each selected face. …
- Select the force units first, then enter the force value. …
- Click . …
- Click Next.
Can you calculate the distance between two nodes in a solidworks simulation result plot?
Distance (available for mesh and displacement plots). Measure the distance between two nodes. Select the two nodes in the graphics area and the distance information appears in the graphics area and PropertyManager.