Program:
(1)Clock (prog Clock 1 Run#)
(2)Base Station (tiny-os → make telosb install.0)
(3)Pagers (prog Pager ID#)
1.Check batteries are present + have enough charge
2.Label and program correct number of pagers
3.Check that labels match computer program + programmed as pagers
(4)Anchors (prog Anchor ID#)
1.Check batteries are present + have enough charge
2.Label and program correct number of anchors
3.Check that labels match + programmed as anchors
(5)Hand Cleaners (prog HandCleaner ID#)
1.Check batteries are present + have enough charge
2.Calibrate them in wall bracket
3.Label and program correct number of hand cleaners
4.Check that labels match + programmed as hand cleaners
Practice In Lab
(1)Make sure Base Station picks up signals from all pieces
(2)Make sure everything syncs + shows up on the demo run as its supposed to
(3)Get all supplies in tool box
(4)Pack up all programmed motes
Set-Up In Hospital
(1)Unpack all parts
(2)Check that everything is still in working condition
1.Batteries still working
2.Hand cleaners properly calibrated
3.runsfb again and see that everything shows up
(3)Put all parts in their specific locations